Once you have successfully created the masterpiece of original acrylic fine art floral painting, it is time to varnish the same. You certainly wouldn’t want your creation to be damaged over time. Your creation is precious for you and to keep it protected from moisture, UV rays, and pollution. Moreover, if done properly, the glow of the painting can be enhanced with varnishing.
With the dazzling vitality of bold hues to make it an eye-catchy one, you must incorporate varnishing in your painting. However, the process of varnishing is not that simple. Like painting, it also needs adequate skillsets.
There are various varnish finish types available in the market. However, these below-mentioned ones are the most common ones:
- Gloss
- Satin
- Matte
It depends on the painter about what they want to use for varnishing, but no matter which type they choose, there are some common considerations to keep in mind while processing with the same. If you are eager to create a varnished original acrylic fine art floral painting go through the tips below.
- As the first step, choose a dust-free area to do the process. Keep your windows and doors closed so that the process is exposed to the least of dust particles in the air. The more you can avoid the contaminants, the higher will be the result of varnishing.
- Use a flat, wide, and soft brush for varnishing so that the process doesn’t get interrupted by the brush’s texture.
- Don’t work on an uneven surface.
- Stirring the varnishing is important for a good consistency. After that, immerse the brush in it and get rid of the excess material by wiping it on the side of the bowl. This will help you avoid dripping issues.
- There is no shortcut to good work. Instead of applying a thick coat of varnishing, apply one to three thin coats, allowing each of them to get dried before applying the next.
- A single bubble can ruin the result of your original acrylic fine art floral painting. Therefore, use long strokes from upper to lower without lifting your brush to eliminate bubbles.
- If you forgot to smear the varnish, don’t do it at all. Avoid smearing the areas twice.
- Post to the completion of varnishing, the artwork should be shielded with the plastic firm so that you can protect it from dust and dirt. The wet surface shouldn’t touch any contaminants before it gets dried.
- You need to be patient in this stage. Varnishing takes time around 24 hours to get dried. Post to drying, if you think to add another coat, do it at the exact angle you did it before.
To preserve your original acrylic fine art floral painting for years, varnishing is unavoidable, and to do it right, you must follow the above-mentioned tips. Remember, the popular artist now was also a novice once. So, never give up if one painting is ruined; try and you will reach perfection for sure.
Comments
Post a Comment